Paper fairing

A whole day with scissors. It is a tricky to get the same impression of both sides of the bike. The left side of the engine is far less decorated: no kick, no oilfilter and no exhaust system. The side panel will also be higher on the left side. The quickest way to compare is to make paper scetches, tape them on and walk around.  When one is smiling for a whole lap the work is done.

Time to transfer the paper models to aluminum. I could have done this in my computer but I´ve learned that the curves chosen by computers are different to the ones made by hand. And I want the panels to have a home made feeling - something added to the bike by the owner.

The distance to the tank is dictated by the right hand side of the engine. The cam chain takes a lot of room, and that gives the feeling that the whole engine is mounted of center. I need a good air flow around the engine, so the right side distance to the tank is transfered to the left side. The room between the panel and cylinder will therefore be bigger on the left than on the right hand side.

The aluminum is new and shining. But I will work a lot with adding an ugly accent to the design (no problems with my limited metal skills). Some wear and tear to match the rest of the almost 30 year old bike. My friend, Mats, came up with the idea to make some extra holes, as if the panels were a part of a bigger fairing, or even dents and rips.

Brand preview

A brand is born. In the beginning of 2012 recyclemotorcycle will move to the new brand farmers racer. The blog will continue and there will be additional subjects to motorcycles and motorcycle gear. Get a sneak preview of the brand by clicking on the picture above.

Wood sketch

Strange fairings are being built in the woorkshop. I have come to the conclusion that I want to use my front end design for one more year - no big front screen. The fairing design is now stripped down to side panels - a perfect place for a numberplate. Through the wood sketches I´ve learned that the curve of the panels is very small. So small that I think i will invest in a good hammer and some aluminum sheet metal. I´d rather spend the winter hammering than messing with glass fiber and resin:)

Tarp prototype

The first prototype of the wrench turning tarp is comming together. The material looks promising and it will be easy for all the customers to recognise the orgin from tyres - both by the weight and texture. After many hours of testing in the workshop I´m already addicted to the little room, around the bike, created by the tarp. It is much easier to keep track of all the tools on the rubber carpet than spreading wrenches and parts all over the floor.


The tarp will be sold under a new brand. Sadly recyclemotorcycle is occupied by a recycled motorcycle shop in US, and this will create some confusion. But a new domain is on the way and this blog will be moved during the winter to the new domain and brand. I will keep you all informed when and were this will be done.

Riding november

Went for a ride just to be able to say - drove my bike untill november. I did reach the 3500km distance this summer, but this last ride was not a holliday. My friend Mats had to turn back home to get a new head light bulb, and this was only the beginning. After this it took us about one hour to get both machines running at the same time. While one motor was idling in the autum breeze, the other bike refused to ignite. Hudududuf - hudududuf - hudududuf. My bike was training my right leg more than my friends leg/bike configuration. All the tricks in the book was used to get my bike running. But as soon as one bike started, the other one gave up. - Test to kick with a full open throttle (Mats idea)... I kicked down hard, and: BANG. It started:) but the engine celebrated by blowing two light bulbs in the process - the tail light and the left turn signal said good bye. No such bulbs in my hometown. Nearest shop is in Kalmar - 25km of illegal racing on small roads and cow trails to reach the shops back door. - My bike back fires, was my friends first words in Kalmar. - The exhaust is shaking. And his diagnoses could not be better. One of the nuts, holding the exhaust system to the cylinder head was somewhere in between where it should be and the neighbourhood. The drive back home was a nice symphony of explosions, rattling metal and not so functional bulbs. But we did drive in november this year!


Thanks Mats for all the laughs:)